Kye-Hwan   Lee

Associate Professor  

Office: EASFC 1.316F
Phone: (956) 665-7055
Email: kyehwan.lee@utrgv.edu

Dr. Kye-Hwan Lee

Please visit my resume section.





Selected Publications


  • Kye-Hwan Lee. "Empirical study on the influence of targeting function of Google Adwords on target evaluation," Japan: Marketing Frontier Journal  6, no. 12, 2016 (December 2016).

  • Donghan Kim, Seokyoung Ahn, Kye-Hwan Lee, Rajiv Nambiar, Sangwon Chung, Seong Jin Park, and Randall German. "Gas-Assisted Powder Injection Molding: A Study About Residual Wall Thickness," Powder Technology, Elsevier 239, (May 2013): 389–402.

  • Seokyoung Ahn, Donghan Kim, Kye-Hwan Lee, Rajiv Nambiar, Sangwon Chung, Seong Jin Park, and Randall German. " Gas-Assisted Powder Injection Molding: Mold Cavity Effects on Residual Wall Thickness," Advances in Powder Metallurgy and Particulate Materials-2011. Princeton, NJ: Metal Powder Industries Federation, 4, May 2011: 145-156.

  • Rajiv Nambiar, Edna Orozco, Kye-Hwan Lee, Seokyoung Ahn, Miguel Gonzalez, and Seong Jin Park. " Gas-Assisted Powder Injection Molding of Polymer and Powder Metal Feedstock in a Stereolithography Mold," Advances in Powder Metallurgy and Particulate Materials-2010. Panama City, Florida: Proceedings of the MPIF Conference, 9, June 2010: 1-49.

  • Jong Park, Shin Eom, Sik Ahn, Hyun Hong, Cho Kim, Soon Yuk, Dongwon Lee, John Rhee, Kye-Hwan Lee, and Gilson Khang. "Dextran/Plga DoubleLayered Microspheres for Sustained Release of Doxorubicin," Tissure Engineering and Regenerative Medicine. Vol 6, no. No. 4-11 (2009): pp588-594.

  • Jiyoung Choi, Bong Lee, JooHyun Kim, and Kye-Hwan Lee. "Improvement of Efficiency in IT -conjugated Polymer Based on Phenothiazine by Introduction of Oxadiazole Pendant as a Side Chain," Macromolecular Research. 17, no. 5 (2009): 319-324.

  • Yun Kim, Sik Ahn, Hyun Park, Su Jung, Hee Hong, Hankoo Lee, Dongwon Lee, John Rhee, Kye-Hwan Lee, and Gilson Khang. "MlcroneedleMedicated Transdermal Delivery of Chondroitin Sulfate," Tissure Engineering and Regenerative Medicine. Vol 6, no. No. 4-11 (2009): pp756-761.

  • L Rowe, Yoonsu Choi, J Ross, Kye-Hwan Lee, N Fogleman, GJ Brewer, J Vukasinovic, A Glezer, SP DeWeerth, and AB Frazier. "A fully functional, packaged active microscaffold system with fluid perfusion and electrical stimulation/recording functionalities for 3-D neuronal culture studies," 14th International Conference on Solid-State Sensors, Actuators and Microsystems Conference, 2007. TRANSDUCERS 2007, 2007: 1389–1392.

  • Rajiv Nambiar, Kye-Hwan Lee, and D. Nagarajan. "Stereolithography Mold Life Extension using Gas-Assisted Injection," Rapid Prototyping Journal Vol. 13, no. 2 (2007): 92-98.

  • Rajiv Nambiar and Kye-Hwan Lee. "Stereolithography Mold Life Extension Using GasAssisted Injection," Rapid Prototyping Journal. Vol. 3, (2007).



Selected Grants and Fellowships


  • Kye-Hwan Lee. Analysis of Beta-Iodine Bottle Leakage, Fresinius Medical Care, $12,000.00 ( )

  • Kye-Hwan Lee. Design of New Detornator Body, Austin Start Detonator, $15,000.00 ( )

  • Kye-Hwan Lee. Manufactring Support of Detonator Body, Austin Star Detonator, $12,000.00 ( )

  • Kye-Hwan Lee. CMMI-MRI 0960136, NSF, $242,959.00 ( )

  • Kye-Hwan Lee. Development of Safety Syringe, SBIR, $241,376.00 ( )

  • Kye-Hwan Lee. Rapid Response Manufacturing of Injection Mold Cavities, PIM-SLA, ARP, $98,575.00 ( )

  • Kye-Hwan Lee. I-Corp, South Texas I-Corp, $3,000.00 ( )

  • Constantine Tarawneh. Amsted Rail Research Projects: Product Enhancements and New Technologies: Part II, Amsted Industries Inc., $518,431.00 (September 1, 2010 - August 31, 2011)

  • Constantine Tarawneh. Amtrak-Amsted Research Projects: Hydraulic Damper System Development and Testing, Amtrak through Amsted Industries Inc., $172,000.00 (December 31, 2009 - December 31, 2010)

  • Constantine Tarawneh. Adapter Polymer Pad Material Characterization: Electric Conductivity Study, Amsted Industries Inc., $28,488.00 (September 1, 2009 - September 1, 2010)



Selected Presentations


  • Rodolfo Becerra, Raul Barbosa, Kye-Hwan Lee, and Young-Gil Park. "Static Mixer for Heat Transfer Enhancement for Mold Cooling Application," Engaged Scholar Symposium 2017, University of Texas Rio Grande Valley, Edinburg, TX (April 2017)

  • Raul Barbosa, Rodolfo Becerra, Young-Gil Park, and Kye-Hwan Lee. "Surface geometry modification for effective water spreading," Engaged Scholar Symposium 2017, University of Texas Rio Grande Valley, Edinburg, TX (April 2017)

  • Rodolfo Becerra, Raul Barbosa, Kye-Hwan Lee, and Young-Gil Park. "Static Mixer for Heat Transfer Enhancement for Mold Cooling Application," APS March Meeting, American Physical Society, New Orleans, LA (March 2017)

  • Raul Barbosa, Rodolfo Becerra, Young-Gil Park, and Kye-Hwan Lee. "Surface geometry modification for effective water spreading," APS March Meeting, American Physical Society, New Orleans, LA (March 2017)

  • Kye-Hwan Lee, Douglas Timmer, and Rajiv Nambiar. "Split-Plot Design and Analysis on Gas-Injection Molding Experiments," ANTEC 2013, Society of Plastics Engineers, Cincinati, OH (2013)

  • Kye-Hwan Lee, Rajiv Nambiar, Donghan Kim, Hyung-Pil Park, Baeg-Soon Cha, Byung-Ohk Rhee, and Seokyoung Ahn. "The effect of cooling rates on gas penetration and fingering of gas-assisted plastic and powder injection molding," ANTEC 2012, Society of Plastics Engineers, Orlando, Florida (2012)

  • Rajiv Nambiar, Kye-Hwan Lee, and Edna Orozco. "Gas-Assisted Powder Injection Molding of Polymer and Powder Metal Feedstock," Advances in Powder Metallurgy and Particulate Materials, MPIF, Panama City Florida (June 2010)

  • Manuel de Hoyos, Seokyoung Ahn, Kye-Hwan Lee, Miguel Gonzalez, and Seong Park. "The Effect Of Processing Variables On Gas Penetration Depth In GasAssisted Powder Injection Molding," International Plm Conference, Orlando, FL (March 2009)

  • S. Ahn, M. de Hoyos, Kye-Hwan Lee, and S. Park. "The Effect of Processing Variables on Gas Bubb1le Formation in Gas-Assisted Powder Injection Molding," Advances in Powder Metalliurgy and Particulate Materials, MPIF, Princeton, NJ (2008)

  • Byung-Ojk Rhee, Hyung-pil Park, Baeg-Soon Cha, and Kye-Hwan Lee. "An Experimental Study of The Variable Runner System," ANTEC 2006, Charlotte, NC (2006)

Current Courses

MANE 3300 A - Computer-Aided Design:
Syllabus
Course Evaluations
Textbooks
MANE 3164 03 - Manuf Processes Lab:
Syllabus
Course Evaluations
Textbooks
MANE 3300 01 - Computer-Aided Design:
Syllabus
Course Evaluations
Textbooks
MANE 3164 01 - Manuf Processes Lab:
Syllabus
Course Evaluations
Textbooks
MANE 6385 01 - Plastics Product Design:
Syllabus
Course Evaluations
Textbooks
MANE 3164 02 - Manuf Processes Lab:
Syllabus
Course Evaluations
Textbooks

Previous Courses